The Cost of Optimizing Only for Minimum No-Load Loss
The lowest no-load-loss design is not necessa…
阅读全文技术资料库工程技术资料
铁芯设计与磁性能
面向变压器铁芯选型、设计与生产的实用工程文章。
65 篇文章
Core-Loss Margin: Name the Uncertainty Before Adding the Allowance
What does the loss margin cover that the buil…
阅读全文No-Load Loss and Exciting Current Measure Different Things
Watts describe energy dissipation. RMS ampere…
阅读全文Why an Approved 110% Excitation Point Can Be So Revealing
Suppose two cores agree near the reference po…
阅读全文Over-Fluxing Is a V/f and Magnetic-Circuit Question
Rated voltage does not establish rated flux w…
阅读全文Stacking Factor: The Area Error That Changes the Operating Point
A stacking-factor assumption enters the magne…
阅读全文Core Diameter and Effective Area Are Not Interchangeable
Which diameter is on the drawing: the physica…
阅读全文Limb Centre Distance: Small Errors, Different Assembly Consequences
Two centre-distance deviations of the same ma…
阅读全文Window Size Means Usable Winding Clearance, Not Just Two Dimensions
A winding can fit the nominal window and stil…
阅读全文Large-Core Dimensional Chains: Why Every Part Can Pass and the Assembly Still Miss
Every dimension on the inspection sheet is gr…
阅读全文Standing and Flat Core Handling Need Different Mechanical Assumptions
A stack that is stable on a building table ha…
阅读全文Which Core Tolerances Are Worth Tightening?
Tolerance should follow sensitivity. A critic…
阅读全文未找到匹配文章，请换用更宽泛的关键词。
工程技术笔记
工程笔记与完整技术文章相互补充，便于快速查阅。