Automation Can Repeat the Wrong Core Recipe Very Precisely
An automated line can reproduce a wrong packe…
Lire l’article completBIBLIOTHÈQUERessources techniques
Essais, normes et spécifications
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
65 articles
More Finished-Core Data Is Useful Only If It Changes a Decision
Would another twenty columns in the supplier …
Lire l’article completHow Efficiency Requirements Change the Core-Supplier Conversation
A tighter transformer loss budget changes wha…
Lire l’article completCore-Loss Margin: Name the Uncertainty Before Adding the Allowance
What does the loss margin cover that the buil…
Lire l’article completNo-Load Loss and Exciting Current Measure Different Things
Watts describe energy dissipation. RMS ampere…
Lire l’article completExciting Current: Read the Denominator Before the Percentage
An exciting-current percentage is incomplete …
Lire l’article completLow-Flux Testing: Useful Evidence with a Different Boundary
A low-voltage diagnostic result should not be…
Lire l’article completWhy an Approved 110% Excitation Point Can Be So Revealing
Suppose two cores agree near the reference po…
Lire l’article completOver-Fluxing Is a V/f and Magnetic-Circuit Question
Rated voltage does not establish rated flux w…
Lire l’article completStacking Factor: The Area Error That Changes the Operating Point
A stacking-factor assumption enters the magne…
Lire l’article completFour Quality Decisions That Should Not Be Collapsed into One
A core can be cosmetically acceptable, dimens…
Lire l’article completWhy a Visually Perfect Core Still Needs Magnetic Evaluation
Would a photograph of a core tell you which o…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.
Fiches de référence techniques
Des fiches de référence synthétiques complètent les articles publiés dans leur intégralité.